HEX ezCAN II Accessory Manager - F650GS Twin, F700GS, F800's, K1300

NOTE: This does not fit the 2024-On F800GS, for that ezCAN please click here.

These products have the latest March 2021 technical updates which improve durability!  To clear up any confusion, there is no “Gen 3”. The latest improvements were incorporated into the existing Gen 2 version in March 2021.

This accessory manager let's you easily add & configure accessories without cutting any wires. It empowers you to easily fit additional lights, an air horn, accessories & emergency brake lights - making the bike safer to ride. Customize your bike and make it safer to ride!

For Models supported, see Applications Tab (above).

• One device manages everything
• Integrates additional safety features
• Does not void warranty
• Plugs directly into CAN-Bus (saves installation time and wiring complexity)
• Unobtrusive - fits perfectly under the seat
• Easy configuration of software via USB (Mac and Windows PC)
• Four individually electronically fused channels
• Waterproof and dust-proof

1. Download and install the HEX ezCAN software
   
2. Install the ezCAN under the seat (Velcro included)
3. Route and connect the ezCAN battery cables
4. Plug the ezCAN into the motorcycle CAN-Bus
5. Plug accessories into the ezCAN
6. Use the software to configure the ezCAN via USB (Mac or Windows PC Software)

Software:

The HEX ezCAN software is available for both Mac and Windows PC and is used via a micro USB cable, which is included in the package.

Use Channel Mapping to select your preferred configuration. The Configuration window then lets you customize the behavior of your accessories according to CAN-Bus inputs, for example setting up an emergency brake light to flash when the ezCAN detects harsh deceleration or the LEDs to flash when the air horn is activated. Accessory/Ignition supply can be set to remain on for a specific time after the ignition is turned off. 

Contents of Package:

• 1 x ezCAN Device
• 1 x Micro USB Cable
• 2 x Velcro Strips
• 2 x Blanking Plugs
• 4 x Cable Ties
• 4 x Two-wire stub connectors (Orange)
• 4 x Terminal wires (Orange)
• 4 x Blanking seals
• 1 x Extra micro USB Dust Covers
• 1 x Green Horn Harness