Wilbers Zero Friction Progressive Fork Springs / XL700V Transalp
Wilbers Zero Friction Progressive Fork Springs have several advantages over linear springs. A Progressive Rate Spring has the advantage of a rising rate resistance to compression. The benefit of this is that the spring can be soft enough at the start of the travel to offer a "plush" ride, yet be firm enough at the end of the travel to soak up the big bumps and dramatically reduce nose-dive under deceleration and braking.
Please note:
10wt oil is recommended for general purpose and for more dirt road riding.
15wt oil is recommended for sport-oriented street riding.
Air chamber is 160mm with springs removed and forks completely compressed.
Instructions for setting air chamber:
1) Remove fork spring and drain old oil.
2) Compress fork fully with spring removed.
3) Add oil until oil level is the prescribed distance from the top of the tube - this is your air chamber.
Piston rods should be pumped several times to dispel any remaining air before final measurement is made.
You May Also Like
TracTive X-CITE Rear Shock / XL700V Transalp '08-On
TracTive X-CITE-PA Rear Shock / Rebound Damping & High Lift HPA / XL700V Transalp '08-On
TracTive X-PERIENCE-PA Rear Shock / XL700V Transalp '08-On
TracTive X-CITE-PA Rear Shock | Rebound Damping & High Lift HPA | XL750 Transalp
TracTive X-CITE-PA Rear Shock (+25mm) | Rebound Damping & High Lift HPA | XL750 Transalp
TracTive X-CITE-PA Rear Shock (-25mm) | Rebound Damping & High Lift HPA | XL750 Transalp